TYPE A

ABRASION RESISTANT BELTS
SPECIFICATIONS OZERBAND  SPECIFICATIONS COMPARATIVE NORMS

TS 547

  TS   4464 UNI 3718 DIN 22102 BS 490
Rubber Grade A* A+ A* A+ A+ A* B+ M* N+ M24* N17+
Tensile Strength (kg/cm2) =>250 =>175 =>250 =>175 =>250 =>250 =>200 =>250 =>200 =>240 =>170
Elongation at Break (%) =>450 =>400 =>450 =>400 =>450 =>550 =>500 =>450 =>400 =>450 =>400
Abrasion (mm³) <=150 <=200 <=150 <=225 <=150 - - <=150 <=200 - -
Hardness (Shore) 63 ± 5 63 ± 5 63 ± 5 63 ± 5 63 ± 5 - - - - -  
Recommended for heavy, sharp edged and large lumps (> 100 mm) in difficult working conditions.
+ Recommended for less heavy, rounded, smaller lumps (< 100 mm)
typea2.jpg (29559 bytes)

Application Places

Cement works: Quarries,open stroge and reclamation, preblending.
Ports: Ship loading or unloading installations
Quarries: Primary and secondary conveyors
Public works: Boring,tunneling,earthmoving
Steelworks:Iron are handling,open storage and reclamation,sinter plant, blast furnace feed, slag recovery.
Electricity Generating Stations: Preblending,feed to hoppers,open storage and reclamation.
Sugar mills: Handling of raw beets
Pulp mills: Handling of logs
Coal Mines: Tipping,refilling,washing
Picture:Afshin-Elbistan Lignite Establishment Clay Belt 1800mm/ST 2500
1 Generally natural rubber based material
2 Recommended for conveying large lumps,abrasive metarial under hard working conditions.
3 Manufactured in compliance with DIN 22102, TS 547, TS 4464, BS 490, UNI 3718.
4 Resistant to high impact energy.
5 Max.70 °C working temperature
6 Elektrostatic conductivity according to TS 547, TS 4464 and DIN 22104 (Resistance<3x108 ohm)
7 Not recommended for oily, acidic,alcali media but resistant to oxygen,ozone,impacts and abrasion.

 

TYPE A TYPE T TYPE O TYPE F

Rubber Conveyor Belts | Fabric | Cold Vulconised Adhesive

home | products |contact | about | references | from chairman